This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Direct connect core to server(s)

Have any of you tired this? I though of setting up a practice DR destination server in the rack and connect it directly to the core with a dedicated switch or crossover cable to keep it off the LAN. It then it occurred to me I could actually connect all of my servers back to the core each on it's own NIC to keep backup overhead off the LAN.

Thoughts?

Parents
  • This would radically change a lot of things for the better. I schedule new snapshots and recoveries around user load because of heave network overhead when doing these things.

    I'll try it and report back for posterity sake if nothing else.
Reply
  • This would radically change a lot of things for the better. I schedule new snapshots and recoveries around user load because of heave network overhead when doing these things.

    I'll try it and report back for posterity sake if nothing else.
Children
No Data