Epson Expression 10000XL

I am using your software to share an Expression 10000XL scanner between me and my wifes computer. We use it mainly for scanning in photos which are somtimes in the region of 450MB, this does not cause a problem on the server machine using epsons software, but when I scan using the client it starts as normal in that I get the message "Please Wait ..Scanning" but after about 2-3 minutes it errors with a message saying that the scanner has failed, the scanner then carries on to scan but does not send the image back to the client. Afterwards I need to reboot the server in order to scan again. Is there some kind of time-out that needs to be set?

I also have another problem, because the images are so large I usually scan them in draft mode(using the epson software) but this dosn't seem to be possible using your client software, I have tried firstly scanning with the epson software in draft mode in the hope that it will save it as a default setting, and then with your client, but no luckso far. Is it possible to set the default settings maybe?

Thank you in advance

Mike
Parents
  • What do you mean draft mode?
    Do you just mean 100 DPI or 25 DPI?

    >> No "Draft mode" and "Best mode" are two settings used by the epson software, they affect the speed and quality of the scan, not the amount of DPI below is a link to the 10000XL manual
    http://files.support.epson.com/pdf/ex10kp/ex10kpu1.pdf

    I can change the timeout that I use for the scanner wait time. I think it is set at 2.5 mins now.

    That would be great, would it be possible to make this time variable so that I could test it, maybe reading the value from an ini file.

    Can we do a net meeting session and you can show me the draft mode

    I have never done a net meeting before but am willing to give it a try, do I have to register with MSN? I will try to get some information about it.

    PS As we are in germany I set the software language to german, but allong the way I have noticed one or two mistakes, If you send me the language file I will happily correct it and send it back.

    Mike
Reply
  • What do you mean draft mode?
    Do you just mean 100 DPI or 25 DPI?

    >> No "Draft mode" and "Best mode" are two settings used by the epson software, they affect the speed and quality of the scan, not the amount of DPI below is a link to the 10000XL manual
    http://files.support.epson.com/pdf/ex10kp/ex10kpu1.pdf

    I can change the timeout that I use for the scanner wait time. I think it is set at 2.5 mins now.

    That would be great, would it be possible to make this time variable so that I could test it, maybe reading the value from an ini file.

    Can we do a net meeting session and you can show me the draft mode

    I have never done a net meeting before but am willing to give it a try, do I have to register with MSN? I will try to get some information about it.

    PS As we are in germany I set the software language to german, but allong the way I have noticed one or two mistakes, If you send me the language file I will happily correct it and send it back.

    Mike
Children
No Data