• State Verified Answer
  • Locked Locked
  • Replies 2 replies
  • Subscribers 5 subscribers
  • Views 5615 views
  • Users 0 members are here
Options
Related
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Scanned DIN A4 Document is stripped to DIN A5 on the RDP-Server

t kunz
over 5 years ago

Hi,

I have several licenses of RemoteScan Enterprise running on Windows 7 and Windows 10. All working well.

A few days ago. I installed a new Canon DR-C225 scanner on an Windows 7 workstation, tested local scanning successfully and then switched the RemoteScan Server from a previously installed Kyocera MFP to the newly installed DR-C225.

Testing the scanning function on the Terminalserver (using our CRM-software and also Twack_32.exe) I received the scanned DIN A4 document stripped off to a DIN A5 Document. The top left area of the scanned document equals to the original document, but the right side and the bottom of the original document is cut off.

This behaviour only occurs on the one mentioned workstation.

The Terminalservers I tested the scanning with run "Windows Server 2003 Standard x64" and "Windows Server 2012 R2". Same behaviour on both machines.

The RemoteScan Client version on the Server 2003 machine is an older version. The RemoteScan Client version on the Server 2012 is an actual version downloaded on Aug. 1st, 2018.

The RemoteScan Server version I used on the Workstation was an older version, too. But now I have updated the Workstation to the RemoteScan Server version downloaded on Aug. 1st, 2018.

Does anyone know what to do to get the complete document transferred to the Terminalserver?

Thanks in advance

Toddy