This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Perc firmware on DL4300

Hi, I have two DL4300 applicance with the latest RUU 3.1.38 and RR 6.1.1. If I look at the OSMA GUI, they said that the firmware for my PERC controller is out of date. Here is the current firmware that is listed

Firmware Version	25.5.0.0018
Driver Version	6.602.35.00
Minimum Required Driver Version	6.603.01.00
Storport Driver Version	6.3.9600.18514

If I go to the DELL support, no available driver or firmware is available for the service tag.

So where I can find the latest available firmware?

If I go on the Idrac, all seems fine, no warning about firmware out of date.

Parents

+1 Tim Seymour over 8 years ago

All the latest drivers for any model DL appliance can be downloaded from our support site. For the DL 4300 go here -support.quest.com/.../download-new-releases. You'll notice on that page that you can change the dropdown menu to choose different product models to get to the drivers for those models.
Cancel
Up 0 Down

Cancel

Reply

+1 Tim Seymour over 8 years ago

All the latest drivers for any model DL appliance can be downloaded from our support site. For the DL 4300 go here -support.quest.com/.../download-new-releases. You'll notice on that page that you can change the dropdown menu to choose different product models to get to the drivers for those models.
Cancel
Up 0 Down

Cancel

Children

No Data