• State Not Answered
  • Locked Locked
  • Replies 14 replies
  • Subscribers 62 subscribers
  • Views 11263 views
  • Users 0 members are here
Options
Related
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Dashboard for monitoring team

arun_jupaka
over 7 years ago

Hi All,

Hope y'all doin' good!


I am stuck with a task for creating a dashboard for our monitoring team. Basically my requirement is to create a dashboard for them with all the list of current/outstanding alarms as a view and under properties of that view, under actions I should have Alarm detail dialog configured as a dwell over row.

Under the Alarm detail dialog they should not be able to view any information i.e., drill-down any information upon clickin' any of the properties.

I tried to copy the Alarm detail dialog views and modify it but seems I'm doin' somethin' wrong.

Requesting your kind help and suggestions on how to achieve this.

Regards,

Arun.

Parents
  • 0 over 7 years ago
    Hi Arun,

    I have tested this now, unfortunately only under Alarms module. I have "Normal" copied the "Alarm List with Filter - Alarm List" row-oriented-table dashboard under the same module, you will have there now "Copy of Alarm List with Filter - Alarm List" dashboard. After that I have disabled "Cell Selection" in the copy dashboard. Then replaced the original one with the copy in the "Alarm List with Filter - Current Alarms" dashboard, which is also under Alarms/AlarmFilter module. Then go to Alarms dashboard and there will be no popup if you click on any alarm line, but only dwell.

    Deep copy seems not to copy all needed components, therefore it shows no alarms.

    Regards,
    Hurshid
Reply
  • 0 over 7 years ago
    Hi Arun,

    I have tested this now, unfortunately only under Alarms module. I have "Normal" copied the "Alarm List with Filter - Alarm List" row-oriented-table dashboard under the same module, you will have there now "Copy of Alarm List with Filter - Alarm List" dashboard. After that I have disabled "Cell Selection" in the copy dashboard. Then replaced the original one with the copy in the "Alarm List with Filter - Current Alarms" dashboard, which is also under Alarms/AlarmFilter module. Then go to Alarms dashboard and there will be no popup if you click on any alarm line, but only dwell.

    Deep copy seems not to copy all needed components, therefore it shows no alarms.

    Regards,
    Hurshid
Children
No Data